Agilent Technologies 947 Betriebs- Und Servicehandbuch Seite 172

Models 947, 948 and 960 Leak Detectors Operations and Service Manual
[SHIFT]
[SHIFT]
[SHIFT]
[SHIFT]
[SHIFT]
[SHIFT]
A-4
Sets the value of the Gross Leak Transfer Point. Enter X.XE-X
SET
(the desired value), followed by SHIFT, then the function key.
GR XFR
Example: 5.0E-2 [SHIFT] SET GR XFER (sets Gross Leak Transfer
SHOW
to 50 mTorr).
SET
Displays the value of the Fine Leak Transfer Point.
FN XFR
SHOW
SET
Sets the value of the Fine Leak Transfer Point. Enter X.XE-X
FN XFR
(the desired value), followed by SHIFT, then the function key.
SHOW
VER
Switches the display backlight. If on, turns it off. If off, turns it on.
B'LITE
VER
Displays the version date and checksum of the installed software.
B'LITE
V FOC
Displays the value of the Repeller Voltage in the Ion Source.
SHOW
RPLR
V FOC
Displays the value of the Variable Focus Voltage in the Ion Source.
SHOW
RPLR
EMIS
Displays the value of the System Gain.
SHOW
GAIN
EMIS
Displays the value of the Emission Current in the Ion Source.
SHOW
GAIN
TURBO
Displays the value of the Ion Voltage in the Ion Source.
SHOW
ION V
TURBO
Displays the status of the Turbo Pump in the leak detector.
SHOW
ION V
PRSRS
Displays the present valve mode of the leak detector.
SHOW
VLV ST