Beginning Work With The Machine - diversey Taski swingo 150B Handbuch

Beginning work with the machine

Attention:
Always wear slip-resistant shoes and ap-
propriate working clothes when working
with this machine!
Attention:
Start familiarization with the machine by
making your first driving attempts in a free
area.
Cleaning start
• Switch on the machine (main switch).
• Hold the machine firmly by the han-
dle and bring it into the working posi-
tion (2) by pressing the red foot pedal
(1).
1
The electrical brushes switch on.
2
• Press the suction switch (1) to switch
on the suction unit. (no lamp).
2
• Press the cleaning solution switch (2)
to open the solenoid valve.
1
Switch lights up
Setting the brush pressure
Attention:
If the red brush pressure control lamp
lights up, correct the brush height as de-
scribed below.
• Adjust the brush height (brush pres-
sure) by turning the regulator until the
green display lights up.
LED display Status indicator
Display green Brush height (brush pressure) correctly
set.
Display red Correct the brush height (brush pres-
sure). Turn the setting knob to the right for
more, and to the left for less brush pres-
sure.
60
Cleaning method
Direct working method:
Scrubbing and suction in one work step.
Indirect working method:
Applying the cleaning solution, scrubbing and suction in sev-
eral work steps.
Notice:
More precise details regarding the direct
and indirect working method can be found
on the respective method sheet.
Please contact your TASKI customer con-
sultant for further details.
Replenishing cleaning solution
Attention:
The flooring may be damaged when work-
ing without cleaning solution.
• The machine must be switched off.
• Open the tank lid.
• Fill the fresh water tank with water, see page 59.
• Add the cleaning product using the dosing cup.
• Close the tank lid.