Prior To Commissioning - diversey Taski swingo 150B Handbuch

Prior to commissioning

Filling the fresh water tank
Attention:
Max. permissible water temperature
35 °C/95 °F.
Diversey recommends using cold water
since hot water will adjust to the floor tem-
perature as soon as it is in contact with the
floor. Thus there are no advantages to us-
ing hot water.
1
3
4
Notice:
The marking will be shown by a label on
the side of the solution tank.
Dosing
Attention:
Wear gloves, goggles and appropriate
(protective) working clothes when han-
dling chemical products!
Notice:
Use chemical products recommended by
Diversey only and always observe the
product information.
Caution:
Using unsuitable products (e.g. products
containing chlorine, acids or solvents) may
cause harm to health and severe damage
to the machine.
Dosing examples:
Information on the pack-
age of the product
1%
2
WATER LEVEL
Temperature
LIVELLO ACQUA
WASSER NIVEAU
+5°C + +35°C
NIVEAU DE L`EAU
+41°F + +95°F
NIVEL DE L`AGUA
M A X
5
Pre-cleaning
Attention:
Do not use any foaming products. Note the
sticker on the front side of the tank.
Tank capaci-
ty
MAX
1 2
max.
= 1% / 26ml =
3
4
Attention:
Remove any objects (wooden, metal parts
etc.) from the cleaning surface.
The objects could be catapulted by the ro
tating tool, and thereby cause injuries to
people and damage to the environment.
EN
Product volume
per tank filling
1 x MAX
-
59