Control Functions - HAPRO Luxura V5 Anleitung

Control functions

The machine is set up for standard use with an external timer or a coinbox. If the machine must function without the external timer or coinbox, i.e.
with an internal timer, the required tanning time will have to be adjusted according to the following procedure.
GENERAL:
+
OPERATION IN COmbINATION WITH AN ExTERNAL TImER OR COINbOx:
Note:
If the external timer or coinbox does not have a "remote start" function, but the machine has to be started up using the "2"
button, you dealer will be able to set this up for you.
Note:
Should the set up need to be interrupted, this can be done by pressing the "3" button.
If no adjustment is entered within 30 seconds, the operation will return to its original settings.
When using an external timer or a coinbox, the tanning time indicator must be set at 0.
1: ENG R
1: ENG R
Hold the buttons "4" and "5" down together for 10 seconds.
After 10 seconds, the display will show "00" (tanning time).
By pressing the button "5" you can increase the tanning time (maximum 30 minutes).
By pressing the button "4" you can decrease the tanning time.
Pressing the "2" button confirms the adjustment.
When confirming, there will be a short electronic bleep tone.
If the use of an external timer is chosen, the indication "-A" will be displayed.
The use of an internal timer will be indicated by the display of "-H".
The machine starts up automatically if there is no "remote start" function on the external timer or coinbox. If this
function is available, the machine must be started by pressing the "2" button.
By pressing the "3" button once, the machine's operation will be paused. If the"3" button is pressed several times, the
machine will remain set at pause. The machine will only stop when the tanning time has expired.
If the machine is set at pause, it can be restarted by pressing the "2" button.
The tanning time ascends numerically.
11