HAPRO Luxura V5 Anleitung Seite 13

ERROR
Note:
If a fault is reported, the electronics will give off bleep tones to alert you.
If one of the abovementioned faults appears on your display, you must not use the machine and remove the plug from the
socket. Contact your dealer for more guidance.
READING OUT THE COUNTERS:
+
+
1: ENG R
1: ENG R
Error!
Internal timer is defect
Error!
Overheating door(s).
Error!
Communication fault between control and switch parts
In order to read out the counter of the tubes, the "3" button and the "5" button must be pressed simultaneously for
three seconds.
Timing indicator x 10 = working hours tubes
A
Example:
A. 759 hours is indicated as 75
B. 9760 is displayed alternately with 1 second intervals as: 9 - 76 - 9 - 76
B
By pressing the "4" button for 10 seconds, the counter is reset at 0 hours.
The counter for the entire machine gives the total number of hours, including the ventilation time. By pressing the "3
and 4" buttons simultaneously for three seconds, the timer can be read off the display.
Timing indicator x 10 = working hours tubes
C
Example:
C. 759 hours is indicated as 75
D
D. 9760 is displayed alternately with 1 second intervals as: 9 - 76 - 9 - 76
This timer cannot be reset to "0" .
13