Working With The Implement - FLORABEST FLV 1200 A1 Originalbetriebsanleitung

Work interruptions:
agencies. agencies.
• After the implement has
• Treat the implement with
• Treat the implement with
been turned off, the
WARNING! The cylinder continues
the greatest care. Always the greatest care. Always
cutting cylinder will
to run for a brief period
keep the tool clean for keep the tool clean for
after the implement has
continue to rotate for a
been switched off. Do not tilt
better and safer work. better and safer work.
few seconds. Keep hands
or carry the implement while
Follow the maintenance
Follow the maintenance
the motor is still running and
and feet well away.
do not touch the cylinder
instructions. instructions.
• Do not touch the spring
while it is still rotating. Danger
• Never overload the • Never overload the
of injury!
tines before the implement
implement. Always work
implement. Always work
has been disconnected

Working with the implement

within the specified
within the specified
from the mains and the
To maintain a well cared-for lawn it should
capacity range. Do not capacity range. Do not
be aerated every 4 to 6 weeks. spring tines have come to
Verticuting is a more intensive intervention
use low-power machines use low-power machines
a complete standstill. Risk
than aerating and should only be carried
for heavy-duty work. Do
for heavy-duty work. Do
out once a year, the best time being in
of injury owing to a sharp
spring after the lawn has been mown for
not operate the implement
not operate the implement
implement!
for purposes for which it for purposes for which it
• Only remove plant parts
When working on slopes
is not intended. is not intended.
when the implement is
always proceed across the
slope. Be particularly careful
standing completely still.
when walking backwards
Electrical safety:
Electrical safety:
Ensure that the grass
and pulling the implement.
Danger of stumbling!
ejector opening is clean
CAUTION! The CAUTION! The
and free.
After work and to transport the im-
following states how
following states how plement disconnect the power plug
• Switch off the power
and wait until the cylinder is stand-
to avoid accidents and
to avoid accidents and
when the implement is to
ing still.
injuries due to electric injuries due to electric The shorter the grass, the better the
be transported, lifted or
lawn can be treated. Furthermore,
shock: shock:
tilted and when traversing
the implement is less stressed and
the service life of the cylinder is pro-
other surfaces than grass.
longed.
• Before each use, carry • Before each use, carry
• Never leave the
• The implement can be operated with or
out a visual inspection of out a visual inspection of
implement unattended at
without the collection bag.
the power and extension the power and extension
Recommendation: Work with the collec-
tion bag for aerating and without the
collection bag for verticuting.
• Mow the lawn to the required grass
height.
the place of work.
cables for signs of cables for signs of
Children should be
damage or ageing. damage or ageing.
supervised to ensure that
•
Damaged mains power
Damaged mains power
they do not play with the
may otherwise wind around the scari-
cables increase the risk of
cables increase the risk of
appliance.
equipment.
electric shock. electric shock.
• Always switch off the
• Select the appropriate working or
• Connect the implement to • Connect the implement to
readjustment position (in the event of
implement and disconnect
cylinder wear) so that the implement is
a power socket with a
a power socket with a
the power plug:
not overloaded.
• residual-current circuit Commence work in the vicinity of the
residual-current circuit
- Whenever you leave the
power socket and proceed away from
breaker that has a rated breaker that has a rated
implement
the socket.
• Always ensure that the extension cable
current of not more than current of not more than
- Before you clean the
is behind you, and after turning move
30 mA.
30 mA.
it to the side that has already been
ejector opening or
treated.
• Always keep the
• Always keep the
unblock or unclog the
• Guide the implement at a walking
extension cable well extension cable well
pace down lanes that are as straight as
implement
possible. To ensure uninterrupted
away from the cutting away from the cutting
- When the implement is
aerating or verticuting the individual
tools.
tools.
lanes should always overlap by a few
not being used
centimetres. Dwelling too long at the
Should the power cable Should the power cable
- During all maintenance
same place while the implement is
become damaged during become damaged during
running can damage the grass sward.
and cleaning work
• To ensure that the extension cable is not
work, then instantly
work, then instantly
- When the power cable
an impediment, turn the implement in
disconnect the power such a manner that the cable strain
disconnect the power
is damaged or has
relief on the bar always faces the side
cable from the mains. DO cable from the mains. DO
become tangled
that has been treated.
• Adjust the transport position 0 setting
NOT TOUCH THE NOT TOUCH THE
- When the implement
(see "Setting the Working Position")
POWER CABLE BEFORE
POWER CABLE BEFORE
when transporting the implement.
hits an obstruction
IT HAS BEEN
• Lift the implement to transport it over IT HAS BEEN
during work or when
steps and sensitive surfaces (e.g. tiles).
DISCONNECTED FROM DISCONNECTED FROM
unusual vibrations arise.
• Always clean the implement after each
use (see "Cleaning/Maintenance").
THE MAINS! Risk of THE MAINS! Risk of
Establish the cause and
• After having treated lawns with dense
electric shock.
electric shock.
moss growth, it is advisable to reseed see if the implement has
the lawn so that it can regenerate itself
• If the power cable for this
• If the power cable for this
been damaged. Do not
quicker.
equipment is damaged, it equipment is damaged, it
repair it yourself! Have
G B R I E
19