Parkside PTSG 140 A1 Originalbetriebsanleitung Seite 18

■ Do not overload your power tool! The tool
will work better and more safely in the specified
performance range.
■ Use the right power tool for the job! Do not
use low performance tools for heavy duty work.
Do not use the power tool for purposes for which
it is not intended. For example, do not use a
circular saw to cut tree branches or logs.
■ Wear suitable clothing! Do not wear loose
clothing or jewellery to avoid getting them
caught in moving parts. Wear non-slip footwear
when working outdoors. If you have long hair,
wear a hairnet.
■ Use protective equipment!
Wear safety goggles.
Use a breathing mask for work which
produces a lot of dust.
■ Connect the dust extraction unit! If there are
connections for dust extraction and collection,
make sure that these are connected and used
properly.
■ Do not use the cord for purposes for which
it is not intended! Do not pull on the cord to
unplug the power tool. Protect the cord from
heat, oil and sharp edges.
■ Secure the workpiece! Use clamps or a vice to
hold the workpiece firmly in place. This is much
safer than simply holding it in your hand.
■ Do not overreach! Keep both feet on the
ground an maintain your balance at all times.
■ 14 │ GB
■ Maintain tools with care! Keep the cutting tools
sharp and clean to be able to work better and
more safely. Follow the instructions on lubrica-
tion and exchanging tools. Check the power
cord regularly and have it replaced by a certi-
fied specialist if it is damaged. Check extension
leads regularly and replace them if they are
damaged. Keep the handles dry, clean and free
from oil and grease.
■ Unplug the appliance from the mains socket!
When the power tool is not in use, before main-
tenance and when changing tools such as saw
blades, drill bits and milling tools.
■ Never leave any tool key attached! Check
that all keys and adjusting tools are removed
before switching the appliance on.
■ Avoid accidentally starting the appliance!
Ensure that the switch is switched to off before
inserting the plug into the wall socket.
■ Use the extension cord for outdoor use! Use
only suitably certified and labelled extension
cords outdoors.
■ Remain alert at all times! Pay attention to what
you are doing. Proceed with caution when
working with the tool. Do not use the power
tool when distracted.
■ Check the power tool for any damage!
Before continuing to use the power tool, check
all safety devices and any slightly damaged
parts to make sure they function properly and
as intended.
PTSG 140 A1