Data Configuration - Citizen CBM-292 Bedienungsanleitung

8.3 Data Configuration

Mark
Space
(1) Start bit
When a 1/2 bit passes from a fall edge of Mark to Space, the status is read again.
be recognized as the start bit.
detect the start bit will be made again without taking it as an error.
(2) Data bits + parity bit
The data is sampled at 1 bit worth of time from the 1/2 start bit and the then status is taken as the data for
the relevant bit.
closest to the start bit.
(3) Stop bit
The stop bit is the Mark level of 1 bit or more.
error will result.
b0, b1, b2
1
1. Start Bit
2. Data Bits(+ Parity Bit)
3. Stop Bits (1 or More)
If it is Mark, it will not be recognized as the start bit.
The bits are arranged in order of Bit 0, Bit 1,..., Parity Bit, counting from the one
....
2
If Space is detected at stop bit detection time, a framing
36
CBM-292/293 User's Manual
3
If it is Space, it will
An attempt to
CITIZEN