Citizen CBM-292 Bedienungsanleitung Seite 76

GS H n
[Function]
[Code]
[Range]
[Outline]
[Caution]
[Defult]
[See Also]
[Sample Program]
Selecting of Printing Position of HRI Code
<1D>H<48>H<n>
{0 ≤ n ≤ 3}
Data is described in Hex code.
Selecting printing position of HRI code in printing bar codes.
• "n" means the followings.
n (Hex)
0
1
2
3
The HRI code refers to the bar code-turned characters so that you can read them.
The HRI code is printed in the font selected with GS f.
Specify before the GS k command.
• The initial value of n is "0".
GS f
LPRINT CHR$ (&H1B) + "3" + CHR$ (5) ;
LPRINT CHR$ (&H1D) + "h" + CHR$ (50) ;
LPRINT CHR$ (&H1D) + "H" + CHR$ (0) ;
GOSUB BC
LPRINT CHR$ (&H1D) + "H" + CHR$ (1) ;
GOSUB BC
LPRINT CHR$ (&H1D) + "H" + CHR$ (2) ;
GOSUB BC
LPRINT CHR$ (&H1D) + "H" + CHR$ (3) ;
GOSUB BC
END
BC :
LPRINT CHR$ (&H1D) + "k" ;
LPRINT CHR$ (4) ;
LPRINT "12" + CHR$ (0) ;
LPRINT CHR$ (&HA) ;
RETURN
Printing Position
No printing
Above the bar code
Below the bar code
Both above and below the bar code
[Print Results]
75
CBM-292/293 User's Manual
CITIZEN