Inhaltsverzeichnis
Werbung
4.10 Power Supply Method and Connection
The power is generally supplied via an AC adapter.
the power, connect the cable as follows:
(1) Connect the accessory cable to the external power source.
7, 8, 9, 10, 11, 12
13, 14, 15, 16, 17, 18
(2) Remove the rear cover, to reveal the control board.
Short-circuit the Jumper(J9, Marked by silk print).
CAUTION:
If the power is supplied via the accessory cable, never connect the AC adapter.
Pin No.
Short-circuit
If you use an interface cable (accessory cable) to supply
Signal Name
Input/Output
V24
GND
CN5
Control Board
28
CBM-292/293 User's Manual
Function
−
Power source (+24 V)
−
Power source (GND)
CITIZEN
Werbung
Inhaltsverzeichnis
