Connecting The Ac Adapter And Ac Power Cord; Connecting Interface Cables - Citizen CT-S281 Kurzanleitung

3 Connecting the AC Adapter and AC Power Cord

1. Turn off the printer power.
2. Plug in the cable connector of the
AC adapter to the power connector
at the rear of the printer.
3. Connect the AC power cord to the
inlet of the of AC adapter, and insert
the AC power-cord plug into a
suitable wall outlet.
CAUTION!
● Use only the specified AC adapter with the printer.
● When disconnecting a cable, do not pull out by the cable. Always hold the plug.
● Always keep the AC power supply away from other noise generating equipment.
● Do not pull the power cord. Otherwise fire, electric shock, or power disconnection
may result.
● If lightning is approaching, unplug the AC power cord from the wall outlet. Otherwise
fire or electric shock may result.
● Keep the power cord away from heat generating appliances. Otherwise the shield of
power cord may be fused resulting in a fire or electric shock.
● If the printer is not to be used for a long time, leave it disconnected from its supply
outlet.
● Lay the cable not to be caught by the leg or the like.

4 Connecting Interface Cables

Turn off the printer and unplug the power connector. Then follow the procedure for
interface cable connection.
Orient the interface cable terminal correctly and insert it into the interface connector.
CAUTION!
● When disconnecting the cable, always hold the connector.
● Lay the cable not to be caught by the leg or the like.
Serial Interface
Inlet
AC power cord
USB cable clamp
USB Interface
— 6 —
AC adapter
Cable
connector