Herunterladen Inhalt Inhalt Diese Seite drucken

Silvercrest SECM 12 A1 Bedienungsanleitung Seite 8

Vorschau ausblenden Andere Handbücher für SECM 12 A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 74
__RP86375_B4.book Seite 6 Mittwoch, 21. November 2012 9:49 09
DANGER! Risk of injury
• To avoid injury and damage to the appliance, do not reach into the ice-cream maker
when running and also make sure you keep your hair, clothing and other items well
away from it.
• Never touch the frozen bowl with wet hands!
WARNING! Risk of material damage
• The bowl must be completely dry before being put into the freezer.
• Do not heat the bowl in excess of 40|°C.
• Hard or sharp objects (e.g. metal spoons) may damage the inside of the bowl. Only ever
use rubber scrapers or wooden utensils when taking out the ice cream you have made.
• Switch the ice-cream maker on first and only add the mix you have prepared to the ma-
chine when running.
• While making ice cream do not switch the ice-cream maker off and then back on. The
ice cream mix would otherwise freeze to the bowl and block the mixing blade.
• Never place the appliance on hot surfaces (e.g. a hob) or near sources of heat or na-
ked flame.
• Only use genuine accessories.
• The appliance is fitted with non-slip silicone feet. As furniture is coated with various var-
nishes and plastics and may be treated with different cleaning products, it cannot be com-
pletely ruled out that some of these substances contain components which may attack and
soften the silicone feet. If necessary, place a non-slip mat underneath the appliance.
• Do not use harsh or abrasive cleaning agents.
• All appliance accessories should be cleaned by hand. (The mixing blade|4 can also
be cleaned in the dishwasher.)
• Should liquid leak from the housing of the bowl, the bowl must be discarded. Although
this liquid is not toxic, it is unsuitable for consumption.
• The appliance includes protection from overheating. This will switch the appliance off
to prevent the motor overheating. In this case unplug and wait until the motor has
cooled down, at least for 15 minutes.
6
GB

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis