Herunterladen Inhalt Inhalt Diese Seite drucken

A D Just Ing The A Ppli An Ce - SOLIS BARISTA PERFETTA PLUS Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
O P E R ATI NG AN D S AFET Y IN FO RMAT ION
The BRITA INTENZA water filter cartridge is designed for use only with
municipally treated tap water (note: this water is constantly controlled and
according to legal regulations safe to drink) or with water from private sup-
plies which has been approved as safe to drink. If an instruction is received
from the authorities that mains water must be boiled, the filtered water
must also be boiled. When the instruction to boil water is no longer in force,
the entire coffee machine must be cleaned and a new cartridge inserted.
GB
Filter cold water only.
Store replacement fiter cartridges in a cool and dry place in their original,
sealed packaging.
Clean the water tank regularly.
For certain groups of people (e.g. people with weakened immune systems,
babies) it is generally recommended to boil tap water. This also applies to
filtered water.
Note for people with kidney disease or dialysis patients: during the filter
process, the potassium content may be increased slightly. Il you suffer from
kidney disease and/or follow a potassium restricted diet, we recommend
prior agreement with your doctor. The amount of released potassium in 1L
of filtered water is lower then potassium contained in either an apple or a
banana.
As water is a foodstuff, the water in the tank must be used up within 1 day.
Should your machine not be in use for a prolonged period (e.g. holiday) we
recommend that you discard any water left inside the tank and leave the
cartridge inside. Before using the machine again, take out the cartridge,
clean the water tank and reinitiate the cartridge as described in the instruc-
tions above.
Should your machine require descaling, always remove the water filter
cartridge from the water tank. After the descaling procedure clean thor-
oughly the whole water tank and reinitiate the cartridge as described in the
instructions above.
BRITA cannot accept any responsibility or liability if the above recommenda-
tions for the use and changing of the BRITA INTENZA water filter cartridge
are not respected.
126
C. A D JUST ING THE A PPLI AN CE
1. Programming the appliance for a water filter
After having inserted the BRITA INTENZA water filter cartridge as described in the
section "Installing the water filter cartridge" on page 124 /125, program the appli-
ance so that the water filter is rinsed with 500 ml of water and the descaling intervals
are adjusted. With a water filter inserted, the intervals between two descaling cycles
are more than twice as long.
Switch the appliance on with the ON/OFF button. Wait for
both coffee buttons to constantly flash white, indicating that
the appliance is in operation mode. Place a container that
holds at least 500 ml under the brewing group.
Press the Prog. button to switch to programming mode. The
Prog. button flashes quickly, a signal sounds and the other
three buttons flash alternately.
Press the
button. Now, only the two coffee buttons
/
flash alternately, the Prog. button keeps flashing
quickly.
Press the
button to confirm that the water filter is inserted.
(
= yes,
= no)
Once the
button lights up constantly and the Prog. button
flashes quickly, the setting is made.
Now, press the Prog. button to activate the automatic rinse
cycle. The program increases the descaling interval of the
machine.
The automatic rinse cycle is performed, 500 ml of water are
flushed through the brewing group. The Prog. and
flash quickly during the rinse cycle.
When the automatic rinse cycle has been completed, the
Prog. button flashes twice, the setting is saved and com-
pleted, a signal sounds twice.
Empty the container containing the hot water from the au-
tomatic rinse cycle. The appliance switches back to operation
mode.
GB
buttons
127

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis