Operation; Plugging In And Ironing; Steam Ironing - Silvercrest SDB 2400 B3 Bedienungsanleitung

Mixed fabric
(steam iron-
ing possible)
(steam iron-
ing possible)
(steam iron-
ing possible)
(steam iron-
ing possible)

Operation

Plugging in and ironing

NOTE
You can dry-iron without steam at all temperatures .
Steam ironing is only possible from temperature
level 8 and upward (
display 1) .
■ 50 │ GB │ MT
Wool
Cotton
Denim
Linen
The automatic switch-off
is activated (see chapter
"Automatic switch-off")
also appears on the
1) Insert the plug into a mains power socket .
There will be a beep and the display 1 will
read "STdby" (Standby) in red letters .
CAUTION – PROPERTY DAMAGE!
► If the clothing care instructions forbid ironing
( ), the garment may not be ironed . Ignor-
ing this warning could lead to permanent
damage to the clothing item .
2) Check the care instructions on the labels in
garments to see if they are suitable for ironing,
and at which temperature setting .
3) To switch on the iron, press the TEMP
3 repeatedly until the required temperature
level appears on the display 1 (see chapter
"Meaning of the display indicators") . Use the
TEMP 2 button to switch to a higher or
lower temperature level .
As soon as the indicator for the material type stops
flashing on the display 1 and a beep is heard,
the set temperature has been reached and you can
begin ironing .
NOTE
If you are ironing very dry and creased fabrics,
you can dampen the material using the spray
function . To dampen the material, press the button
for the spray function 4 .

Steam ironing

NOTE
The temperature level must be set at least to
level 8 . Otherwise no steam will be produced .
■ Set the steam control 9 to the desired steam
setting .
–
Turn the steam control 9 towards
generate more steam .
–
Turn the steam control 9 towards
generate less steam .
button
to
to
SDB 2400 B3