Warning Displays; Camera Warning Displays - Panasonic AK-UB300G Bedienungsanleitung

Warning displays

6
Turn the jog dial button to select a menu item to configure.
7
Press the jog dial button.
The setting of the item indicated by the arrow flashes. (Fig. 3)
8
Turn the jog dial button to change the setting.
9
Press the jog dial button.
The setting is confirmed.
Pressing the <MENU> button to exit the menu screen also reflects the setting.
NOTE
@
t This can be changed quickly by pressing and turning the jog dial button.
Warning displays
Content of the warning is displayed in the output from the <HD SDI OUT 2> terminal when an error is
detected while operating.

Camera warning displays

r When AWB (automatic white balance) is executed
[AWB HIGH LIGHT NG]
[AWB LOW LIGHT NG]
[AWB RCH OUT RANGE]
[AWB BCH OUT RANGE]
r When ABB (automatic black balance) is executed
[ABB RCH OUT RANGE]
[ABB BCH OUT RANGE]
[ABB GCH OUT RANGE]
[ABB NG]
r Executing black shading
[BSHD NG]
50
Automatic white balance cannot be executed because the light amount is
excessive.
Set the light amount to an appropriate level.
Automatic white balance cannot be executed because the light amount is
insufficient.
Set the light amount to an appropriate level.
The white balance convergence for red cannot be achieved.
Shoot a uniformly white object on the screen, and execute AWB.
The white balance convergence for blue cannot be achieved.
Shoot a uniformly white object on the screen, and execute AWB.
The black balance convergence for red cannot be achieved.
Check if there are any errors in the image.
The black balance convergence for blue cannot be achieved.
Check if there are any errors in the image.
The black balance convergence for green cannot be achieved.
Check if there are any errors in the image.
The lens iris may not be closed.
An error has occurred with the black shading.
Check if the lens is correctly closed.