Panasonic AK-UB300G Bedienungsanleitung Seite 14

Installation
c: Camera mounting fixture (procured locally)
d: Flange nut (supplied)
e: Wire mounting screw (supplied) (screw: M4)
Purchase a commercially available M4 screw separately when the length of the screw is not enough.
f: Screw hole
Drill a hole of 5 mm diameter.
g: Screw hole
Drill a hole of 7 mm diameter.
h: Flat washer (procured locally)
i: Spring washer (procured locally)
j: Mounting screws (procured locally) (inch screw: 1/4-20 UNC)
k: Screw hole
Drill a hole of 10 mm diameter.
l: Flat washer (procured locally)
m: Spring washer (procured locally)
n: Mounting screws (procured locally) (inch screw: 3/8-16 UNC)
14