Inhaltsverzeichnis
Werbung
Description of parts
Right side
1 < > mark
Indicates the imaging plane inside the camera.
Rear side
1 Back tally lamp
Lights up when the tally signal is supplied.
Blinks in red while displaying warning, and blinks in green during the firmware update.
@
NOTE
t The brightness can be set with [MAIN MENU] → [SWITCH MODE] → [TALLY] → [BACK TALLY].
Blinks in green [LOW] regardless of setting during the firmware update.
2 <MENU> button
Press this button to display the camera's [MAIN MENU] screen.
Press the button again to return to the original image.
3 Jog dial button
This will perform the navigation of setting menu pages, and selection or setting of the item when the
setting menu is displayed.
The cursor will move down when the jog dial button is turned downward. The cursor will move up when
turned upward.
Press the jog dial button to fix the settings.
4 <I/F> terminal
Connect the cable for the external synchronization signal and the control signal to the camera.
46
1
2
3
4
5
15
1
6
7
8
9
10
11
12
13
14
Werbung
Kapitel
Inhaltsverzeichnis
