Other Warning Displays; Updating The Camera Firmware; Specifications; General - Panasonic AK-UB300G Bedienungsanleitung

Other warning displays

Together with the displaying the content of the warning, the <WARNING> lamp will illuminate in red, and
the front tally lamp and the back tally lamp will blink in red.
[FAN NG]
[HIGH TEMPERATURE]
[LOW VOLTAGE]
[SHUTDOWN SOON]

Updating the camera firmware

Refer to the following website for new updates of the firmware and for operating instructions.
http://pro-av.panasonic.net/

Specifications

For details on specifications, visit the Panasonic website (http://pro-av.panasonic.net/en/manual/index.
html) and refer to the Operating Instructions (HTML version).

General

Power
DC e 12 V (DC 11 V–17 V)
Power consumption
40 W (body only, when 3G SDI×4 is output)
60 W (maximum power when all accessories are connected and each output terminal is outputting at maximum)
indicates safety information.
Ambient operating temperature
Storage temperature
Ambient operating humidity
Weight
Dimensions (W×H×D)
There is a problem in the fan.
The internal temperature is high.
The voltage of the external DC power supply is low.
The internal temperature is rising more than expected. Or, the voltage of the
external DC power supply has lowered beyond the operation guarantee.
The power is turned off forcefully in 30 seconds.
−10 °C – 45 °C (14 °F – 113 °F)
(Preheating required under a temperature 0 °C (32 °F) or below)
−20 °C – 60 °C (−4 °F – 140 °F)
85% or less (relative humidity)
Approx. 1.6 k] (3.53 lbs.) (body only)
Body only
110 mm×140 mm×160 mm
(4-11/32 inches×5-17/32 inches×6-5/16 inches)
(excluding protrusions)
Updating the camera firmware
51