Mounting The Lens - Panasonic AK-UB300G Bedienungsanleitung

Mounting the lens

The lens with 2/3 type bayonet can be mounted.
1
Raise the lens fixing lever and remove the mount cap.
2
Mount the lens, lower the lens fixing lever, and securely fix the lens. (Fig. 1)
3
Connect the iris control cable to the <IRIS> terminal. (Fig. 2)
4
Connect the zoom/focus control cable to the <ZOOM/FOCUS> terminal. (Fig. 2)
Connect to the pan/tilt head when using the pan/tilt head.
5
Attach the filters supplied with the cables to the iris control cable and the zoom/focus
control cable. (Fig. 3)
@ NOTE
t Securely fix the lens with the lens fixing lever, and confirm that there is no rattling.
t Also confirm that there is no rattling of the hood.
t The zoom and focus functions may not be controlled depending on the lens.
t The iris control cable may not reach the connector depending on the lens. In such case, use an
extension cable.
t The filter for cable may not be supplied depending on the lens.
Fig. 1
Filter
Fig. 3
Zoom/focus control cable
Iris control cable
Fig. 2
Mounting the lens
17