Technical Specifications - Quick MILL 06004 Bedienungsanleitung

FOREWORD
Keep this instruction handbook in a safe place, for any information or problems not
covered in this handbook contact qualified personnel.
1.1 SYMBOLS
The warning triangle identifies all important explanations related to
personal safety. Pay attention to these instructions to prevent accidents!
2
The number or letter numeric symbols indicate references to illustrations and parts of
the machine including keys, illuminated buttons, etc.
This symbol indicates important information for obtaining the best
machine performance.
The manufacturer shall not be held liable for any damage in the event of:
• Uses not in compliance with the intended purposes;
• Alteration of the power supply cord;
• Alteration of any of the machine parts;
• Repairs not made at authorised serviced centres;
• Use of non-original components or accessories;
This product meets the requirements on labelling established in the WEEE
Directive (2002/96/EC). The symbol on the side indicates that this electric or
electronic product must not be disposed of in a container for household waste.
PRODUCT CATEGORY with reference to the types of equipment listed in
Annex 1 of the WEEE Directive, this product falls under category 2 ìSmall
applicancesî.
DO NOT THROW AWAY IN A CONTAINER FOR HOUSEHOLD WASTE.
Failure to comply with the above shall result in forfeiture of the warranty.

2. TECHNICAL SPECIFICATIONS

Rated voltage See the adhesive plate on the
machine.
Rated power:
Power supply
Dimensions
See the adhesive plate on the
machine.
See the adhesive plate on the
machine.
L 25 x H 38 x D 28 cm.