Mod 03004/6004
5. Pull out the steam wand 11
6. Wait for the illuminated button 5 to go out.
7. Place a container under the steam wand 11
8. Press the hot water switch 8, when the desired amount of water has been dispensed
turn off the switch.
8. DISPENSING STEAM (CAPPUCCINO)
Hot water may spray out when initially dispensing. The tube can get very hot, do not touch
it with your hands. There is a serious danger of being burned.
Series 03004/06004
6. Pull out the steam wand 11
7. Wait for the illuminated button 5 to go out.
8. Insert the air mixer 12 in the steam wand 11.
9. Put the steam wand 11 and mixer 12 in the cold milk to heat.
10. Press the steam switch 7, when the beverage has reached the desired temperature
and amount of foam, turn off the switch.
The same procedure can be used to heat beverages.
9. CLEANING, REPAIRING OR MAINTENANCE WORK
Before carrying out cleaning, repairing or maintenance work on the coffee machine
disconnect the plug from the socket and wait for the machine to cool off.
9.1 REPAIRING AND MAINTENANCE
Do not open the machine, for faults which require repairs or maintenance, contact a
QUICK MILL authorised Technical Service Centre only. The manufacturer shall not be
held liable for inadequate operations.
9.2 CLEANING
The water always has some lime in it and with time this builds up on the machine tubes.
The lime needs to be removed every 3/4 months, when there is a reduction in the amount
of water dispensed. Use lime removal or descalers products specific for coffee machines
which are not toxic. They can be found on the market. Follow the manufacturer's
instructions on the package.
10. STORAGE AND DISPOSAL
If the coffee machine is not going to be used for a long time, removed the plug from the
socket, keep it away from atmospheric agents (dust, dirt, etc.) storing it in a safe place out
of the reach of children. If you decide not to use the appliance any longer, it is advisable to
make it unusable by cutting the power supply cord after unplugging it.