Description; Technical Characteristics; Safety; Vibrations - Quick MILL Evolution '70 Bedienungsanleitung

Mod. Evolution '70 push-buttons

3. DESCRIPTION

3.1. Technical Characteristics

The machine is comprised of thermoblocks which heat
the water and produce steam. Different versions, with
single or double heat exchangers, and with an optional
coffee grinder, are available. The outer shell of the
machine is composed of a stainless steel structural
frame. All versions are controlled by an electronic
circuit board to regulate heat via temperature probes,
and manage the delivery of drinks. All versions have an
electronic water volume doser for coffee delivery and
electronic temperature control.

3.2. Safety

The heating elements are equipped with a thermal
protector with manual reset which interrupts the
heating in the case of failure. The coffee circuit is
equipped with a mechanical spring control valve to
regulate overpressure up to a maximum 14 Bar which
allows the coffee delivery pressure to be adjusted. The
electromagnetic pump is equipped with a thermal
protector with an automatic reset which protects
against overheating. All of the heating elements and
parts under electric tension are within the paneling of
the machine and are not externally accessible.

3.3. Vibrations

The machine is supplied with rubber vibration damping
feet. In normal working conditions the machine does
not generate vibrations which could damage objects or
cause injury to persons.
4. TECHNICAL CHARACTERISTICS

4.1. Versions

Coffee/steam
Model heat
exchanger
3130 X
3140
3135 X
3145

4.2. Dimensions

Model L = mm H = mm
3130 250
3140 250
3135 316
3145 316
Water tank capacity
Ambient working temperature

4.3. Technical data

Model Rating
3130 1150 W
Double Coffee
exchanger grinder
X
X
X X
D = WEIGHT
mm Kg
355 335
375 335
382 335
382 335
1.8 Lt.
+5 °C / + 45 °C
Current Power supply
10 A
3140 1720 W
3135 1250 W
3145 1820 W
3130 1150 W
3140 1720 W
3135 1250 W
3145 1820 W
5. LEGEND (Fig. 1)
A) Water/steam anti-scalding dispensing nozzle
B) Water tank
C) Pressure gauge
D) Coffee delivery group
E) Filter holder
F) Discharge basin
G) Cup rest grille
H) Coffee grinder nozzle (only mod. 3135/3145)
I) Coffee presser (only mod. 3135/3145)
J) T1 single coffee dose delivery push-button
J) T2 double coffee dose delivery push-button
L) T3 steam delivery push-button
M) T4 hot water delivery push-button
N) Coffee heating indicator light
O) Steam heating indicator light
(Only mod.3140/3145)
P) Coffee grind dose potentiometer
(Only mod.3135/3145)
Q2) T5 grind coffee push-button
3135/3145)
R) Coffee grinder fork (only mod. 3135/3145)
S) Coffee bean hopper
(Only mod.3135/3145)
T) Pump pressure regulation knob
U) Power cable socket
V) Main switch (ON/OFF/ON)

6. INTENDED USE

The machine was designed and manufactured for the
delivery of coffee drinks and the preparation of hot
drinks (tea, cappuccino, etc.).
Any other use is to be considered improper and
therefore dangerous.
The operator must always comply with the
instructions for use and maintenance in this
manual.
In the event of doubt or irregularities during operation,
stop the machine, refrain from performing direct
repairs or interventions and contact the authorised
service centre.
Rev.05
15 A 110-120 V
50-60 Hz
11 A
16 A
5 A
7.5 A 220-230 V
5.5 A 50-60 Hz
8 A
(Only mod.