Storage; Disposal; Troubleshooting - Silvercrest SDB 2400 A1 Bedienungsanleitung

WARNING – RISK OF INJURY!
► Allow the appliance to cool down before
cleaning it! Otherwise, there is a risk of burns!
CAUTION – PROPERTY DAMAGE!
► Do not use solvents or abrasive cleaners.
These will damage the surface of the appliance!
► Do not use abrasive, aggressive or chemical
cleaning agents! They could irreparably
damage the surface!
GB
■ Clean the housing with a soft, dry cloth only.
MT

Storage

■ Empty any remaining water from the water tank.
■ Store the cooled-down appliance in a clean,
dust-free and dry location.

Troubleshooting

PROBLEM
The appliance is not
working.
The steam iron is producing
no or very little steam.
The steam iron does not
get hot.
If the malfunction cannot be corrected with the above suggestions, or if you have found some
other kind of malfunction, please contact our Customer Service.
46

Disposal

Dispose of the appliance via an approved disposal
company or your municipal waste facility. Please
observe the currently applicable regulations.
Please contact your waste disposal centre if you
are in any doubt.
POSSIBLE CAUSE
The appliance is not connected
with a mains power socket.
The appliance is damaged.
The reserves of water in the
steam iron are depleted.
The steam iron is not plugged
in or is not switched on.
The steam iron is defective.
Under no circumstances
should you dispose of the ap-
pliance in the normal domestic
waste. This product is subject
to the provisions of European
Directive 2012/19/EU.
The packaging is made from environ-
mentally friendly material and can be
disposed of at your local recycling plant.
POSSIBLE SOLUTIONS
Connect the appliance to a
mains power socket.
Contact Customer Services.
Fill the water tank with wa-
ter (See "Filling the water
tank").
Insert the plug into a mains
power socket and adjust
the temperature regulator
to the desired temperature
level.
Arrange for the steam iron
to be repaired by qualified
specialists.
SDB 2400 A1