General Description; Extent Of The Delivery; Overview; Functional Description - Parkside PBSA 12 C2 Originalbetriebsanleitung

GB MT

General description

The illustrations are on the
front and back fold-out page.

Extent of the delivery

Carefully unpack the appliance and check
that it is complete:
- Cordless Drill
- Battery-charger
- Battery
- Storage case
- Instruction Manual charger and battery
- Instruction Manual
Pictured bit and drill not included.

Overview

1 Keyless drill chuck
2 Chuck ring
3 Torque adjustment ring
4 Battery Indicator
5 Speed selector
6 Direction of rotation switch
7 Battery
8 Battery release button
9 On/off switch
10 LED working light
11 Drill chuck aperture
12 Storage case
13 Charger
14 Bitholder

Functional description

The cordless drill with two-speed gearing
has a 19+1 level torque adjustment, left/
right running, a removable keyless chuck, a
6-point bitholder and an LED working light.
38

Technical data

Cordless Drill ............... PBSA 12 C2
Motor voltage U ..........................12 V
Idling speed n
0
1st gear .............................0-350 min
2nd gear ......................... 0-1200 min
Maximum torque .......................... 28 Nm
Span-chuck ............................ 0.8-10 mm
Weight (without battery charger) .... 1.0 kg
Drilling capacity
for wood .......................... max. 25 mm
for steel ............................. max. 8 mm
Sound power level
(L ) ...................... 69 dB(A), K
pA
Sound power level
(L ) .................... 80 dB(A); K
WA
Vibration (a )
h
Drilling in metal ...................< 2.5 m/s
Screwdriving .......................< 2.5 m/s
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration of
conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use of
the power tool from the stated value
depending on the manner in which
the power tool is used.
Try to keep the exposure to vibrations as
low as possible. Examples of measures
to reduce vibration exposure are the
-1
-1
= 3 dB
pA
= 3 dB
WA
2
2
K= 1.5 m/s
2