Introduction; Connections, Control And Display Elements - Cameo OPUS S5 CLOS5 Bedienungsanleitung

INTRODUCTION

MOVING HEAD OPUS SERIES
CLOS5
CONTROL FUNCTIONS
27-channel and 33-channel DMX control
Art-Net
sACN
W-DMX™
RDM enabled
Master / slave mode
Stand-alone functions
PROPERTIES
380W LED. Animation wheel. CMY + CTO color mixture. Color wheel with 7 brilliant colors + open and split colors. Gobo wheel 1 with 8
fixed gobos + open. Gobo wheel 2 with 7 rotating gobos + open (gobos interchangeable). 2 rotating prisms. Focusing and zoom function
controllable via DMX. Frost filter and iris. Stroboscopic. Pan and tilt motors with 16 bit resolution. Battery-powered display for configuration
when not connected to power. Automatic position correction. Temperature-controlled fans. 3- and 5-pin DMX connector. RJ45 network con-
nector. Wireless DMX™. Neutrik powerCON TRUE1 mains connector, IN and OUT. 2 omega mounting brackets included. Operating voltage:
100-240V AC. Power consumption: 530W.
The spotlight has the RDM standard (Remote Device Management). This device manager allows the user to request the status of and
configure RDM end devices via an RDM-capable controller.

CONNECTIONS, CONTROL AND DISPLAY ELEMENTS

3
POWER IN
1
Neutrik powerCON TRUE1 mains input socket. Operating voltage: 100 - 240V AC / 50 - 60Hz. A suitable power cable with powerCON TRUE1
plug is included in delivery.
POWER OUT
2
Neutrik powerCON TRUE1 mains output socket. Serves to provide power to additional CAMEO spotlights. Ensure that the total power
consumption of all devices connected to the device does not exceeded the given Ampere (A) value.
3 FUSE
Fuse holder for 5 x 20 mm micro fuses. IMPORTANT INFO: Replace the fuse only with a fuse of the same type and values. If a fuse trips
repeatedly, please contact an authorized service center.
4 DMX IN
Male 3- and 5-pin XLR connectors to connect a DMX control device (e.g. DMX console).
DMX OUT
5
Female 3- and 5-pin XLR connectors to transmit the DMX control signal.
8
1 2
6
4
7
5
5