Installation - Victron energy Phoenix 12/30 (1+1) Bedienungsanleitung

2. Installation

Install the charger vertically on a non-combustible surface with the
•
supply terminal facing down. To optimise cooling, maintain a minimum
distance of 10 cm below and above the product.
• Install close to the battery, but never immediately above the battery (to
prevent damage due to gas formation by the battery).
Use flexible multi-core copper cables for the connections: see safety
•
instructions.
Poor internal temperature compensation (e.g. ambient conditions of
•
battery and charger not within 5°C) may shorten the life span of the
battery.
3