Victron energy Phoenix 12/30 (1+1) Bedienungsanleitung Seite 11

can be selected by pressing the MODE button again after selecting the
desired charging algorithm.
During RECONDITION, the battery is charged to a higher voltage using a
low current (8% of the rated current). RECONDITION takes place at the
end of the absorption phase and ends after one hour or sooner once the
higher voltage has been reached.
The RECONDITION LED will be lit while charging and will blink during
RECONDITION.
Example:
For a 12/30 battery charger: the reconditioning current is 30 x 0.08 = 2.4A.
4. FLOAT
Float charging. Keeps the battery at a constant voltage and fully charged.
5. STORAGE
Storage mode. Keeps the battery at a lower constant voltage to limit gas
formation and corrosion of the positive plates.
6. READY (battery fully charged)
The battery is fully charged when the FLOAT or STORAGE LED is lit.
7. REFRESH
Slow self-discharging is prevented by automatically 'refreshing' the battery
with a brief absorption charge.
11