Victron energy Phoenix 12/30 (1+1) Bedienungsanleitung Seite 5

4. Key properties and features
4.1. Bluetooth functionality
Set-up, monitoring and updating of the charger. Option for parallel
redundant charging and option for external voltage and temperature
compensation using the Smart Battery Sense (separately available).
New functions can be added once they become available using Apple and
Android smartphones, tablets and other devices.
When using Bluetooth functionality, a PIN can be set to prevent
unauthorised access to the device. This PIN can be reset to its default
value (000000) by holding the MODE button down for 10 seconds.
4.2. VE.Direct port
For a wired connection with a Color Control, Venus GX, PC or other
devices.
4.3. Programmable relay
Can be programmed (e.g. with a smartphone) for activation by an alarm or
other events.
4.4. 'Green' battery charger with very high efficiency
With an efficiency of up to 94%, these battery chargers generate up to four times
less heat than the industry standard. And once the battery is fully charged,
power consumption drops to less than 1 Watt, which is five to ten times better
than the industry standard.
4.5. Sustainable, safe and silent
- Low thermal load on the electronic components.
- Overheating protection: The output current drops if the temperature rises to
60°C.
- The charger is cooled by means of natural convection. This eliminates the
need for a noisy cooling fan.
4.6. Temperature-compensated charging
The optimum charging voltage of a lead acid battery is inversely proportional to
the temperature. The Phoenix Smart Charger measures the ambient
temperature at the start of the charging phase and compensates for the
temperature while charging. The temperature is measured again when the
5