Lenovo ThinkStation P320 Hardwarebedienungsanleitung Seite 137

5. Slide the new 2.5-inch internal storage drive into the kit from the rear until the internal storage drive
snaps into position.
Figure 79. Sliding the new 2.5-inch internal storage drive into the kit
6. Pivot the rear cover of the kit inward until you hear a click. The rear cover is secured in place.
Figure 80. Pivoting the rear cover inward
Replacing a 3.5-inch internal storage drive with a 2.5-inch internal storage drive
To replace a 3.5-inch internal storage drive with a 2.5-inch internal storage drive, do the following:
1. Ensure that the 3.5-inch internal storage drive is removed from the bracket first. See "3.5-inch internal
storage drive" on page 123.
.
Chapter 9 Hardware installation and replacement
129