Lenovo ThinkStation P320 Hardwarebedienungsanleitung Seite 107

b. The heat sink is secured by two mounting studs. Pinch the clips of the studs inward
push the studs upward
drive adapter
Figure 21. Removing the heat sink from the M.2 solid-state drive adapter
c. The M.2 solid-state drive is secured by a retention latch. Pull the handle of the retention latch
outward to release the M.2 solid-state drive. Then, gently pull the M.2 solid-state drive out of
the M.2 slot.
Figure 22. Removing the M.2 solid-state drive
• If you are installing an M.2 solid-state drive, pull outward the handle of the retention latch in the
M.2 solid-state drive adapter.
4. Ensure that a thermal pad is placed in position on the M.2 solid-state drive adapter.
2 to release the heat sink. Then, lift the heat sink off the M.2 solid-state
3
.
.
Chapter 9 Hardware installation and replacement
1 and
99