M.2 Solid-State Drive - Lenovo ThinkStation P320 Hardwarebedienungsanleitung

6. Pivot the card latch to the closed position to secure the PCIe card.
Figure 20. Installing a PCIe card
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 166.

M.2 solid-state drive

Attention: Do not open your computer or attempt any repair before reading and understanding the Chapter
1 "Read this first: Important safety information" on page 1.
To install or replace an M.2 solid-state drive, do the following:
1. Prepare your computer. See "Preparing your computer and removing the computer cover" on page 91.
2. Lay the computer on its side for easier access to the system board.
3. Depending on whether you are installing or replacing an M.2 solid-state drive, do one of the following:
• If you are replacing an M.2 solid-state drive, do the following:
a. Locate and remove the M.2 solid-state drive adapter. See "PCIe card" on page 96.
98
P320 Hardware Maintenance Manual