Reset To Default Settings - Telecom Behnke 20-2907A-IP Anleitung

Instructions Behnke IP camera
GB GB
The app functionality* of the SIP app „TC Behnke"

4.7. Reset to default settings

The camera may be returned to default set-
tings after initialisation (approx. 2 minutes
after power on) when the red LED
nently illuminated.
Please press the reset button
pressed for at least three seconds.
72
The red LED
the reset button and increases the flashing
is perma- intervals once the button is let go. After-
wards, the camera will reboot.
and keep it As soon as the red indicator LED
again permanently illuminated, the camera
has been returned to its default settings and
is ready to go.
starts flashing upon pressing
is once
www.behnke-online.com