Starting The App; Overview; Main Screen - Telecom Behnke 20-2907A-IP Anleitung

Instructions Behnke IP camera
GB GB
The app functionality* of the SIP app „TC Behnke"

4.2. Starting the app

Download the "TC Behnke" app from Apple's
AppStore or from Google Play, depending on
your type of smartphone or tablet PC. The
screenshots shown in the present instructions
were created on an iOS device. The app looks
exactly the same on Android devices. To open
the menu at the bottom of the screen, press
the Menu button on your Android device.
After starting the app you will see an empty
start screen.
Please make sure that when setting up your
mobile device, the power savings settings of
your operating system (especially on Android
devices) do not interfere with the app.
To use the app with your Behnke IP camera,
you first need to assign a user to the camera,
please cf. chapter "Camera Administration",
alternatively, you may use the user that has
been set-up by default. The access creden-
tials for this user are included on the camera
supplement. Then you need to add the door
intercom, please cf. chapter "Adding door
intercom devices". To do so, you will need the
access information provided during the user
assignment process.
Please note: You cannot add a door intercom
using the administrator's access information.
Your door intercom set-up is successfully
completed.
62

4.3. Overview

The "TC Behnke App's" three most important
screens are as follows:

Main screen

This screen appears upon starting the app.
Depending on the user's authorisation set-
tings a camera image is provided or not.
*
Das Handhörersymbol zum Aufbau der
Audioverbindung mittels APP ist nur bei IP-
Kamera (20-2097-IP/21-2907-IP/50-2907-IP,
50-9587) ohne B-Smart Funktion nutzbar.
www.behnke-online.com
*