User Management - Telecom Behnke 20-2907A-IP Anleitung

Instructions Behnke IP camera
GB GB
The app functionality* of the SIP app „TC Behnke"

User management

User name
matically be filled in. Enter a "Name
easier user identification at a later stage. It
is not possible to "Save
a name. Determine if the user in question
should always have access to the live video
feed . When disabled, the user in question
will only have access to the video feed with
an incoming call from the door intercom.
Without a call from the door intercom the
video feed cannot be accessed. Make a note
of the access credentials displayed here
("User" and "Password"). You will need this
information for app configuration of the video
image feed. See the next chapter "Adding
door intercom devices" to learn how to do
so. Tap "Save
camera. Tapping "Delete
user selected from this camera. A deleted
user no longer has access to the camera. Tap
"Change " to change the user's password. A
new random password will be generated and
saved in the camera. Then the user enters this
new password into their smartphone. Please
use the app key "SIP settings"
the SIP client's access information enabling
you to accept an incoming call from your SIP
door intercom directly via the app. In case
your telephone number differs from your SIP
user name, you may enter your telephone
number in the section "telephone numbers
". Should this extension be part of a group of
extensions, you may also add this group of
extensions in the section "telephone numbers
".
66
and password will auto-
" without entering
" to assign this user to the
" will delete the
to enter
" for
Please note:
Items and
available when using IP
cameras with B-Smart
function (20-2907A-IP/21-2907A-IP/
50-2907A-IP, 43-9587A, 50-1204A,
50-1207A), because the APP cannot be
used as a SIP subscriber here.
are not
www.behnke-online.com