Connecting The Ip Camera With B-Smart Function (20-2907A-Ip/21-2907A-Ip/ 50-2907A-Ip, 43-9587A, 50-1204A, 50-1207A) Stand Alone (Without Behnke A/B Intercom) - Telecom Behnke 20-2907A-IP Anleitung

1.8. Connecting the IP camera with B-Smart function (20-2907A-IP/21-2907A-IP/
50-2907A-IP, 43-9587A, 50-1204A, 50-1207A) stand alone
(without Behnke a/b intercom)
Camera power supply through POE class 0
*
Deep module housings not sufficient for IP camera
*
1
observe the relevant network technology standards and regulations for the network
infrastructure.
When using the Behnke IP video software, please see the IP video software manual on our
website for further information on the IP video software: www.behnke-online.de/downloads
Important: Always use the latest version of the Behnke IP video software.
www.behnke-online.com
or
*
1
Network
Open door
function
Instructions Behnke IP camera
Introduction
Connecting cable
between the IP
camera with B-Smart
function and your
Key
button cannot exceed
50 cm
Wiring only in connection
with the open door function
via the "TC Behnke" app
Voltage supply on site
Important: Observe the relay
switching capacities in the camera
specifications
GB
51