Heater Operation - Coltene BioSonic UC150 Benutzerhandbuch

42-log
43-information
44-close-lid
• Once the timer reaches zero, "Program Successful" will be displayed on the screen until any
45-lid-is-open
button is pressed. Press
46-lid-was-open
47-repair
NOTE: The cleaning cycle can be stopped at any time by pressing the start or pause. Press
48-software-update
return to the main screen.
50-A-button-standby
50-B-button-standby-feedback
• The BioSonic Ultrasonic cleaner shall always be covered when operating to trap aerosols in the
51-statusbar-standby-closed
52-statusbar-standby-opened
unit. The BioSonic UC150 is equipped with a hinged cover for easy one hand opening. The cover
60-attention
also conveniently lifts off for cleaning in spaces with low cabinets above the unit.
61-instructions
62-A-button-ok
62-B-button-ok-feedback

Heater Operation

warning/caution
Activating the Heat Feature
The UC150 model is equipped with a heater to accelerate heating of the solution in the tank.
01-logo-loading
NOTE: The temperature in the tank is displayed in the top bar of the LCD screen.
Pressing the 02-logo-information
time this feature is activated, the user must enter the activation code. Press
04-A-button-program-light
entered. The heating function will now be available to use.
04-B-button-program-light-feedback
05-A-button-program-regular
* In order to obtain the activation code, visit https://biosonic.coltene.com or email customer service
05-B-button-program-regular-feedback
at info.ch@coltene.com or info.us@coltene.com
06-A-button-program-heavy
06-B-button-program-heavy-feedback
07-A-button-program-my
01-logo-loading
Set the Desired Temperature
07-B-button-program-my-feedback
11-A-button-settings
00 vector graphics: single-icons and screen buttons
02-logo-information • Press the
11-B-button-settings-feedback
08-A-button-log
00 vector graphics: single-icons and screen buttons
08-B-button-log-feedback
• Select "HEATER ON" to activate heating function. Press
30-settings
• A symbol will be displayed on the top of main screen if heater is selected ON. The heater will
31-temperature-large
now function during the selected cleaning cycle.
32-temperature-medium
00 vector graphics: single-icons and screen buttons
33-temperature-small
• Select "HEATER OFF" if heating is not desired.
34-program-light
35-program-regular
• A blinking
36-program-heavy
cleaning cycle. Current temperature information will always be displayed in the top of the LCD
37-program-my
display.
38-timer-medium
The heating function of the UC150 (if enabled) takes place until set temperature
39-timer-large
only. Through prolonged use, the natural cavitation process will continue to heat
40-solution
the solution beyond the desired temperature. When this happens, the unit is still
41-degas
CAUTION!
functioning properly.
hot surface
10
return to the main screen or to abort the process.
00 vector graphics: single-icons and screen buttons
03-product-name
key to activate this feature will bring up a new screen on the display. The first 09-1-A-button-heater- rst
09-2-A-button-heater-after-code
09-B-button-heater-feedback
10-A-button-solution-degas
10-B-button-solution-degas-feedback
12-A-button-language-measurest
12-B-button-language-measures-feedback
13-A-button-date-time
13-B-button-date-time-feedback
14-A-button-my-setup
03-product-name
14-B-button-my-setup-feedback
15-A-button-information
button. Set the temperature between 25°C (75°F) and 60°C (140°F).
09-1-A-button-heater- rst
15-B-button-information-feedback
09-2-A-button-heater-after-code
09-B-button-heater-feedback
16-A-button-degas
10-A-button-solution-degas
16-B-button-degas-feedback
30-settings
10-B-button-solution-degas-feedback
12-A-button-language-measurest
42-log
31-temperature-large
12-B-button-language-measures-feedback
43-information
32-temperature-medium 13-A-button-date-time
13-B-button-date-time-feedback
44-close-lid
33-temperature-small
14-A-button-my-setup
14-B-button-my-setup-feedback
45-lid-is-open
34-program-light
15-A-button-information
46-lid-was-open
35-program-regular 15-B-button-information-feedback
30-settings
16-A-button-degas
47-repair
36-program-heavy
16-B-button-degas-feedback
symbol on the main screen is displayed while the heating is in progress during a
M 1:1
31-temperature-large
48-software-update 20.10.2016
37-program-my
50-A-button-standby
32-temperature-medium
50-B-button-standby-feedback
38-timer-medium
33-temperature-small
51-statusbar-standby-closed
39-timer-large
34-program-light
52-statusbar-standby-opened
40-solution
60-attention
35-program-regular
41-degas
61-instructions
36-program-heavy
62-A-button-ok
hot surface
62-B-button-ok-feedback
37-program-my
warning/caution
38-timer-medium
39-timer-large
00 vector graphics: single-icons and screen buttons
20-A-button-checked
20-B-button-checked-feedback
21-A-button-save
30-settings
21-B-button-save-feedback
31-temperature-large
22-A-button-home
22-B-button-home-feedback
32-temperature-medium
23-A-button-back
33-temperature-small
23-B-button-back-feedback
34-program-light
24-A-button-download
24-B-button-download-feedback
35-program-regular
25-A-button-play
36-program-heavy
25-B-button-play-feedback
37-program-my
26-A-button-pause
26-B-button-pause-feedback
38-timer-medium
39-timer-large
CB
40-solution
M 1:1
20.10.2016
41-degas
hot surface
30-settings
31-temperature-large
32-temperature-medium
33-temperature-small
34-program-light
35-program-regular
36-program-heavy
37-program-my
38-timer-medium
CB
42-log
M 1:1
39-timer-large
20.10.2016
43-information
40-solution
44-close-lid
41-degas
45-lid-is-open
hot surface
46-lid-was-open
47-repair
42-log
48-software-update
CB
43-information
50-A-button-standby
50-B-button-standby-feedback
44-close-lid
51-statusbar-standby-closed
45-lid-is-open
52-statusbar-standby-opened
60-attention
46-lid-was-open
61-instructions
47-repair
62-A-button-ok
62-B-button-ok-feedback 48-software-update
50-A-button-standby
warning/caution
50-B-button-standby-feedback
51-statusbar-standby-closed
52-statusbar-standby-opened
60-attention
42-log
43-information
44-close-lid
45-lid-is-open
46-lid-was-open
47-repair
48-software-update
50-A-button-standby
50-B-button-standby-feedback
51-statusbar-standby-closed
52-statusbar-standby-opened
60-attention
61-instructions
62-A-button-ok
62-B-button-ok-feedback
warning/caution
42-log
43-information
44-close-lid
45-lid-is-open
46-lid-was-open
47-repair
48-software-update
50-A-button-standby
50-B-button-standby-feedback
51-statusbar-standby-closed
52-statusbar-standby-opened
to accept the temperature. 20-A-button-checked
60-attention
20-B-button-checked-feedback
20-A-button-checked
61-instructions
20-B-button-checked-feedback 21-A-button-save
62-A-button-ok
21-B-button-save-feedback
62-B-button-ok-feedback
21-A-button-save
21-B-button-save-feedback
22-A-button-home
warning/caution
22-B-button-home-feedback
22-A-button-home
22-B-button-home-feedback
23-A-button-back
23-B-button-back-feedback
23-A-button-back
20-A-button-checked
23-B-button-back-feedback 24-A-button-download
20-B-button-checked-feedback
24-B-button-download-feedback
24-A-button-download
21-A-button-save
24-B-button-download-feedback 25-A-button-play
21-B-button-save-feedback
25-B-button-play-feedback
25-A-button-play
22-A-button-home
25-B-button-play-feedback
26-A-button-pause 22-B-button-home-feedback
26-B-button-pause-feedback
26-A-button-pause
23-A-button-back
26-B-button-pause-feedback
23-B-button-back-feedback
24-A-button-download
20.10.2016
24-B-button-download-feedback
CB
M 1:1
20.10.2016
25-A-button-play
25-B-button-play-feedback
26-A-button-pause
26-B-button-pause-feedback
to
20-A-button-checked
20-B-button-checked-feedbac
once code is
21-A-button-save
21-B-button-save-feedback
22-A-button-home
22-B-button-home-feedback
23-A-button-back
23-B-button-back-feedback
24-A-button-download
24-B-button-download-feedba
25-A-button-play
25-B-button-play-feedback
26-A-button-pause
26-B-button-pause-feedback
CB
M 1:1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
20.1