Switching Off The Alarm Signal; Using The Snooze Function - Auriol HG00870A Bedienungs- Und Sicherheitshinweise

Press the ALARM button again to turn the alarm on or off.
The alarm symbol
activated.
Press the MODE button 2 again to leave alarm mode.
The ALM display will disappear and the product returns
to clock mode. In clock mode the alarm function being
activated is also indicated by the Alarm symbol

Switching off the alarm signal

Note: With the alarm activated a signal with 4 levels will
sound for approx. 2 minutes at the alarm time set. The alarm
symbol
Press the ALARM 1 button to switch off the alarm. The
alarm symbol stops flashing. The static alarm symbol con-
tinues to appear in the info field 7 .
Note: If the alarm function is not switched off, the alarm will
again sound the next day at the set time.

Using the snooze function

Press the SNOOZE / LIGHT 5 button when the alarm
sounds to activate the snooze function. The alarm sound
will stop and sound again 10 minutes later. During this
11 flashes.
11 indicates the alarm has been
11 .
GB/IE/NI 27