Set Up The Alarm Clock Safely; Display And Controls; Setup - Auriol 4-LD5079 Bedienungs- Und Sicherheitshinweise

If the battery leaks, avoid contact with skin, eyes and mucous membranes. Use gloves. If
you are exposed to battery acid, rinse the affected areas with plenty of clean water and
immediately seek medical attention. Remove discharged batteries from the device as they
present an increased risk of leakage.

Set up the alarm clock safely

The alarm clock is not intended for use in rooms with high humidity (example: bath room).
Make sure that:
 the device isn't placed on a thick carpet or bed during operation ;
 no direct heat sources (i.e. radiators) influence the device;
 no direct sunlight reaches the device;
 contact with splashing or dripping water must be avoided (don't place any items filled
with liquids, i.e. vases, onto or next to the device);
 the device doesn't stand near magnetic fields (i.e. speakers);
 candles and other open flames must be kept away from this product at all times to
prevent the spread of fire
 no foreign objects penetrate the housing.

Display and controls

1 Display
2 SNOOZE / LIGHT
3 Time
4 Seconds
5 Radio tower indicator / DST
6 Temperature indicator
7 Day of the week indicator
8 Date indicator, D=day, M=month
9 Alarm 2 (6 - 7)
10 Alarm 1 (1 - 5)
11 Alarm time
12 Snooze indicator
13 12/24 hour time format

Setup

Remove the protective film from the display of the alarm clock. Open the battery
compartment 19 on the backside of the device and insert a 1.5V AA R6/LR6 battery in
the correct polarity. Close the battery compartment 19.
Radio time signal reception starts automatically after inserting the battery and the alarm
clock will beep once. The radio tower indicator
process can take 3-10 minutes.
14 SET / °C / °F
15 ALARM / SET
16 RCC / RESET
17
/ ALARM ON / OFF
18
/ RCC OFF
19 Battery compartment
20
5 will blink on the display. This
- 3 -