2.2
O
VERVIEW PRESENTATION
The chargers are divided into 2 areas :
The user interface area
The energy conversion area (all maintenance in this area is forbidden except CRISTEC authorization, under penalty
of warranty exclusion)
Fixing of the charger is made by 4 off M5 round head screws (screw head diameter of less than 10 mm) .
Fixing center : see corresponding drawing in the appendices 3 to 5 depending on model.
Fixing by 4 off M5
round head screws
CONNECTIONS :
AC input terminal : WAGO type
WINSTA reference 770‐813
2.3
U
SER INTERFACE AREA
Chargers YPO 12‐16, 12‐25 and 24‐12 ‐ See appendix 1
Chargers YPO 12‐40, 12‐60, 24‐20 and 24‐30 ‐ See appendix 2
Terminal for temperature probe
STP‐5M (option)
User interface area
User interface area open screw
(must be screwed to ensure the individual
protection)
DC output terminal :
PHOENIX CONTACT PC 16/4‐GF‐10,16 for
models YPO 12‐16, 12‐25, 12‐40, 24‐12
and 24‐20.
PHOENIX CONTACT PC35 HC/4‐GF‐15,00
for models YPO 12‐60 and 24‐30.
Removable front
cover
23