On The Remote Control - Sony Bedienungsanleitung

2
To label a track, press EDIT/ENTER
again.
To label a disc, press = or +
repeatedly until "
flashes in the display, then press
EDIT/ENTER.
3
Follow steps 4 to 6 of "Labeling a disc
during stop" above.
To cancel labeling, press p or T MARK.
Note
If the recording is stopped while labeling a
track or a disc, or if the next track begins on
the recording source while labeling a track,
the labeling that is input up to that point is
entered automatically.
: Name"

On the remote control

TRACK
MARK
VOL +/–
p
Labeling a disc during stop
1
Insert a disc.
To label a disc that is already in the
recorder, press p to stop.
2
Press DISPLAY for 2 seconds or
more.
" : Name" flashes in the display.
3
Press p.
The disc is ready to be labeled.
4
Turn the control to select a letter and
press p to enter.
The selected letter stops flashing and
the cursor moves to the next input
position.
To
Press/ Turn
Switch between capital
P
letters, small letters, and
marks / numbers.
Move the cursor to the
VOL +/–
left or right.
Change the letter to the
=/(•+
one before / next one.
Insert a blank space to
DISPLAY
type in a new letter.
Delete a letter and move
PLAY MODE
back all following letters
to the left.
Cancel labeling.
TRACK MARK
DISPLAY
PLAY MODE
P
Control
continued
25-
GB