Elektror S-HP serie Betriebs- Und Montageanleitung Seite 23

www.elektror.com
8 DECLARATION OF INSTALLATION CONFORMITY PURSUANT TO ANNEX II 1 B
DECLARATION OF CONFORMITY IN ACC. WITH EVPG (ENERGY CONSUMPTION
RELEVANT PRODUCTS ACT).SECTION 4 PARAGRAPH 1
As manufacturer,
Elektror airsystems gmbh
Hellmuth-Hirth-Strasse 2
D-73760 Ostfi ldern
herewith declares that the product, to which this declaration relates, complies with the following essential requirements
of the Machinery Directive (2006/42/EC).
Description of the partially completed machine:
ATEX Stainless Steel High Pressure Blower S-HP 265/18, S-HP 265/33, S-HP 290/30, S-HP 365/18, S-HP 380/30,
with the following designation for gas:
with the following designation for dust:
with the following designation for gas
and dust:
The serial number and year of manufacture can be found on the rating place and the corresponding delivery note.
Description of the essential requirements of the directives, with which the partially completed machine complies:
Machinery Directive (2006/42/EC), Annex I, Articles 1.1.2, 1.1.3, 1.1.5, 1.3.2, 1.3.3, 1.3.4, 1.3.7, 1.5.1, 1.6.1, 1.7.1, 1.7.3
Electromagnetic Compatibility Directive (2014/30/EU)
Directive on equipment and protective systems intended for use in potentially explosive atmospheres (2014/34/EC)
The partially completed machine described here continues to fulfi l the protective regulations of the Low Voltage Directive
(2014/35/EC) according to Annex I No. 1.5.1 of the Machinery Directive.
The commissioning of the partially completed machine is not permitted until it has been verifi ed that the machine in which the partially
completed machine is to be installed, complies with the provisions of the Machinery Directive (2006/42/EC).
The following harmonised standards have been applied:
DIN EN ISO 12100 2011
ISO 14694 2003
DIN EN 1127-1 2011
DIN EN ISO 80079-36 2016
DIN EN ISO 80079-37 2016
DIN EN 14986 2017
DIN EN 60079-0 2014
DIN EN 60079-1 2015
DIN EN 60079-7 2016
As manufacturer, Elektror airsystems undertakes to forward the special technical documentation in respect of the partially completed
machine to national authorities at their request. The special technical documentation in respect of this partially completed machine
according to Appendix VII Part B has been created and is lodged with the "notifi ed body" EU No. 0637.
Person responsible for the documentation: Mr. Kevin Kargar, Tel. +49 711 31973-1179.
Kreher (Managing Director)
Ostfi ldern, 30.06.2019
Operating and assembly instructions S-MP ATEX
S-HP 395/30, S-HP 470/35
II 3G Ex h IIB T4 Gc /
II 3G Ex h IIC T4 Gc /
II 2G Ex h IIC T4 Gb
II 3D Ex h IIIC T125°C Dc /
II 2G Ex h IIB T4 Gb
II 3D Ex h IIIC T135°C Dc
Safety of machinery - General principles for design - Risk assessment and risk reduction
Industrial fans - Specifi cations for balance quality and vibration levels
Explosive atmospheres - Explosion prevention and protection -
Part 1: Basic concepts and methodology
Explosive atmospheres
Part 36: Non-electrical equipment for use in potentially explosive atmospheres -
Basic concepts and requirements
Explosive atmospheres
Part 37: Non-electrical equipment for use in potentially explosive atmospheres -
Protection by constructional safety "c"
Design of fans working in potentially explosive atmospheres
Electrical apparatus for potentially explosive atmospheres
Part 0: Equipment - General requirements
Electrical apparatus for potentially explosive atmospheres
Part 1: Equipment protection by fl ame-proof enclosures 'd'
Explosive atmospheres
Part 7: Equipment protection by increased safety "e"
II 3G Ex h IIB T3 Gc / II 3G Ex h IIC T3 Gc
II 2G Ex h IIB T3 Gb / II 2G Ex h IIB T4 Gb
II 3D Ex h IIIC T135°C Dc
II 2G Ex h IIB T4 Gb
/
II 3D Ex h IIIC T135°C Dc
EN
23