Operation - Silvercrest SDGS 1630 A1 Bedienungsanleitung Und Sicherheitshinweise

4) Screw the lid tight and turn the water tank
the lid is closed tight enough that no water can escape .
5) Put the water tank

Operation

►
NOTE
►
►
1) Loosen the Velcro strap
2) Plug the power cable
appliance by pressing the On/Off switch
(fig . M) . The operating light
up . When the appliance starts producing steam, the operating light
up permanently green .
3) Hang your clothing item on the integrated clothes hanger
clothes hanger that you can attach to the clothes hanger mount
integrated clothes hanger
integrated clothes hanger
4) Take hold of the steam head
away from your body .
5) Start at the top of the piece of clothing and move the steam head
slowly (fig . O) . Make sure that the steam hose
6) To make your work easier, clamp the bottom of the clothing into the diagonal
bracket
move it to the desired position (fig . Q) .
■ 12 │ GB │ IE │ NI │ CY
back onto the appliance base
t
K
WARNING – RISK OF INJURY!
Never attempt to steam pieces of clothing while they are being worn .
When using the appliance, make sure to remove all materials that could
block the casters
o
ance on a level, horizontal surface) .
Do not use the appliance on very thick rugs or carpets .
9
before you start steaming (fig . P) . Pull out and rotate the bracket to
7
t
of the garment steamer from the floor (use the appli-
(fig . L) and unroll the power cable
0
into the mains power socket and switch on the
flashes green while the appliance is heating
i
. Also use the clips for trousers/dresses
3
to steam trousers or dresses (fig . N) .
3
. Make sure you aim the steam openings
1
around again (fig . J) . Check that
(fig . K) .
z
fully .
9
on the front of the appliance
u
or another
3
5
1
is always vertical .
w
SDGS 1630 A1
lights
i
of the
in the
4
down