Water Hardness - Silvercrest SDGS 1630 A1 Bedienungsanleitung Und Sicherheitshinweise

NOTE
►
►
1) Remove the mains plug from the power socket if connected .
2) Remove the water tank
by the handle (fig . I), then turn the water tank
3) Unscrew the lid and fill up the water tank
cates the maximum filling level .
SDGS 1630 A1
Use tap water in the appliance . If your tap water is hard, we recommend
that you mix it with distilled water . Otherwise, the appliance will accumu-
late limescale quickly .
Mix the tap water with distilled water in accordance with the following
table for optimal performance:

Water hardness

very soft/soft
medium
hard
very hard
Information about the level of hardness of water in your area can be
obtained from your local water company .
Never use water that contains additives (e .g . starch, perfumes, softening
agents) or condensation (e .g . from dryers, refrigerators, air conditioning
units or rain) . These may contain organic or mineral residues that accumu-
late when exposed to heat and can cause noise, brown discolouration and
premature failure of the appliance .
I
Ratio of distilled
water to mains
from the appliance base
t
t
J
water
0
1: 1
2: 1
3: 1
by pulling it upwards
z
around .
t
(fig . J) . The "MAX" mark indi-
GB │ IE │ NI │ CY │ 11 ■