Sahara Brod & Taylor DR-710 Bedienungsanleitung Seite 8

Quick Start Guide
Follow the Setup Guide before consulting the Quick Start Guide.
Step 1. Cut food into thin slices, discarding any cores and/or seeds. Make sure all
slices are the same even thickness.
Step 2. Open glass doors. (Clean all shelves before first use.) Place food on the drying
shelves and then slide the shelves into the dehydrator and shut the glass doors.
Step 3. Press the Power Button
be white.
Step 4. Verify the
the time and left to decrease.
Step 5. Once the desired time has been chosen, press the Mode Button
Temperature. Spin the Control Wheel right to increase the temperature and left to
decrease temperature. The temperature will change in one-degree increments.
Step 6. Press Start
is how much time is remaining. NOTE: During operation, Start/Pause
be pressed to pause operation. When paused, the Time and Temperature may be
adjusted. Press Start/Pause again to restart operation.
Step 7. Upon completion, the appliance will beep, unless muted. Exercise caution
when opening the glass doors and removing the food. Assume that the contents and
shelves may be very hot.
Step 8. Press the Power Button
ensure everything has cooled, then fold for storage. See Setup Guide for instructions
on how to fold the dehydrator for storage.
to turn on the Sahara Dehydrator. The screen will
symbol is on TIME. Rotate the Control Wheel right to increase
TIME
10:00 135
TIME
10:00 140
The screen will turn amber. The time displayed on screen
to turn off the appliance. Allow 10 minutes to
TEMP
°F
TEMP
°F
to select
may
brodandtaylor.com | 8