Sahara Brod & Taylor DR-710 Bedienungsanleitung Seite 6

Getting to Know Your Dehydrator
1 2
6
1 Power – On/Off
Press the button to Power On the device, which displays the time and
temperature settings. This is Standby Mode. Press again to Power Off.
2 Start/Pause (Stop)
Initiate device operation using the times and temperatures currently visible
on the LCD screen. Once initiated, the LCD screen will change from white to
amber.
3 Mode Selection Button
Press Mode button to switch from the time to temperature setting. The
symbol indicates which value is currently selected. The Control Wheel adjusts
the value selected. Hold for 2 seconds to access Dual Time / Temperature mode
(Time 2 and Temp 2).
4 LCD Screen
Display shows the time on the left and the temperature on the right (F or C),
Mute option status and Dual Time / Temperature settings (if active). Display
backlight is white when paused, amber when heating. During operation display
shows time remaining (countdown).
5 Control Wheel
Scroll to the left or right to adjust Time and Temperature depending on the Mode
selected. Selections can be determined by the
left to decrease.
10:00 100
3
7
TIME TEMP
°C
°F
4
. Scroll right to increase value,
5
brodandtaylor.com | 6