Troubleshooting - Klarstein Ion Breeze Bedienungsanleitung

EN
40
Maintenance of the refrigerant system
CAUTION
Risk of injury! Maintenance or repair work on the refrigerant system
may only be carried out by authorised specialist companies and trained
specialists. Maintenance by unqualifi ed persons can lead to injuries
and damage to the refrigerant system!

TROUBLESHOOTING

Problem
The device is not running.
There is air coming out of
the unit.
Possible cause
The device was not
switched on.
The fuse is broken.
The time for the start timer
has not expired yet.
The temperature has been
set incorrectly.
The air fi lters are blocked.
The air inlet or air outlet is
blocked.
The unit is in a very hot
room.
Doors and windows are
open.
Suggested solution
Press the POWER button.
Have the fuse replaced by
a specialist.
Wait or deactivate the
timer.
The set temperature in
COOL mode should
be lower than the room
temperature.
Clean the fi lters.
Remove anything that
obstructs air fl ow.
The unit needs a little
more time to reach the set
temperature.
Close doors and windows.