Troubleshooting - Klarstein FROSTIK Bedienungsanleitung

EN
42

TROUBLESHOOTING

Problem
Air conditioner does not
work.
Is the voltage too high or
too low?
Mist is coming out.
The air conditioner is noisy.
Condensation water
is running out of the
appliance...
The unit does not start 3
minutes after a restart.
Check
Is there a power failure?
Is the plug connected?
Has the fuse blown?
Is the voltage too high or too low?
Is the air inlet or outlet blocked?
Is there a heat or cold source in the room?
Are the air filters heavily contaminated?
Is the fan on a low setting?
The room may be too hot or cold when the
appliance starts.
Misty air occasionally leaves the appliance in
cooling mode because the humid air in the room
has cooled down too quickly.
The appliance operates normally while an odour
is coming from the air inlet inside. This occurs
when the air sucked in mixes with the smell of
furniture and smoke.
If the noise sounds like running water, then this
is the flow of the refrigerant.
If it is a spraying sound, it is the sound of water
being drawn out of the air and running in the
appliance.
Condensation occurs when the airflow from the
air conditioner cools the warm air in the room.
This is a protective mechanism of the unit.
Wait 3 minutes before restarting the appliance.