Klarstein Ion Breeze Bedienungsanleitung Seite 28

EN
28
(3) FAN-SPEED button: Press the button repeatedly to set the fan speed in the following
order: AUTO > HI > MED > LOW > AUTO. The inicator above the button indicates
the set speed.
Note: In FAN mode, the speed cannot be set to AUTO.
(4) Buttons (+) and (-): Each time you press one of these buttons, the temperature
increases or decreases by 1°C (1°F). The temperature can be set between
16°C (60°F) and 32°C (90°F). Press and hold both buttons for more than 3
seconds to toggle between °C and °F.
(5) MODE button: Press the buttons repeatedly to select one of the following modes:
AUTO > COOL > DRY > FAN. The indicators above the button will indicate the set
mode.
(6) SLEEP button: Press the button to enter night mode. After 8 hours, the unit will
automatically turn off and save the current settings.
Note: SLEEP mode cannot be activated in FAN and DRY mode.
(7) TIMER button: Press the button and the inicator above the button will turn on. Press
(+) or (-) to set the desired time. Wait 5 seconds for the timer to start automatically.
If you press the TIMER button and do not make any further setting for more than 5
seconds, the timer will be automatically deactivated. The same applies when the
timer has expired and the display shows [0]. While the timer is running, press the
TIMER button once to display the remaining time. Press the TIMER button again to
deactivate the timer.
Note: If you set the timer when the unit is off, it will turn on after the set time. If you set
the timer when the unit is on, it will turn off after the set time.
(8) SWING button: Press the button to start the swing function. The inicator above the
key lights up.