Settings - Mini Advanced Car Eye 2.0 Bedienungsanleitung

Install firmware update
As soon as a firmware update is available, the
ACE 2.0 app will request that you install it.
Before installing an update of the ACE
2.0, your smartphone (min. 50 %
battery capacity) must be set to airplane
mode since otherwise incoming calls
could interfere with or interrupt the
update.
A firmware update may result in
the micro SD card being formatted
automatically. In other words, all
existing data may be deleted. If
necessary, back up the media data on
your micro SD card beforehand.
Your personal settings will remaining
place after a firmware update.
Switching on and off manually
•
Switch on the device by pressing the Power
button briefly when the ignition is on.
•
It can be switched off by pressing the
Power button for at least 3 seconds.
36

Settings

You can alter the default settings using the ACE
2.0 app to adjust the camera properties to suit
your personal requirements, your driving style
and the ambient conditions.
Individual basic settings:
•
Recording types
•
Triggering thresholds for the sensors
•
Selection of manual recording
•
Camera selection/image frequency
•
Microphone volume
•
Wi-Fi settings
There are also extended and information
settings:
•
Information display in videos:
–
Date
–
Time
–
GPS coordinates
–
Speed
–
Speed units
•
Switching the safety LED on and off
•
Switching the GPS function on and off:
–
Calculating driving speed
–
Location
–
Coordinates in the media data
•
Displaying the ACE 2.0 log file
•
General information about the product:
–
Operating manual
–
Data protection
–
Conditions for use
–
Legal notice
–
Software
If the speed indicator is active, excess
speeds may be documented in the
recorded media files.