Sharpening The Blade / Grinding Service; Repair; Transport And Storage; Return Of Decommissioned Equipment - EFA 802 Betriebsanleitung

6.4 Sharpening the blade / grinding
service
Improperly sharpened blades lead to low production
rates and an increased risk of injury to the operator.
We are therefore providing a blade
sharpening service for customers.
Contact your local authorised repair shop
or the Schmid & Wezel customer service
department.
Schmid & Wezel operates an efficient grinding
service for blades.
Phone +49 (0)7043 102-0, fax +49 (0)7043/102-
78.

6.5 Repair

Before carrying out any repair
work, disconnect the cutter from
the power supply!
All repairs must be completed by authorised
specialist technicians.
Schmid & Wezel operates an extensive after-
sales service network. Contact your local
authorised repair shop or the Schmid & Wezel
customer service department for more
information on our services.
For spare parts lists, see Kapitel A.3 "Liste der
Ersatz- und Verschleißteile" (S. 10)

7. Transport and storage

The cutter must be stored in a dry, well-ventilated
room.
For transport, clean the machine as described in
Chapter 6.1 "Daily cleaning and disinfection" (page
7), and dry it thoroughly.
During transport, protect the cutter against damage
from impacts, etc.
8. Return of decommissioned
equipment
For proper disposal, return your equipment to
Schmid & Wezel.
Schmid & Wezel
D75433 Maulbronn,
Page/ Seite
8/ 14
Version/ Ausführung
08.2005